3 Guidelines To Choose An HVAC System That’s Right For Your House
An HVAC system is an essential part of our daily life as it provides heating, cooling, and proper ventilation to our house and workplace.
In the HVAC system, there will be a device that compares the actual state with that of a target state and operate accordingly.
The selection of an HVAC system should be done very carefully as you are making a significant investment to stay comfortable throughout the year.
There are mainly 4 types of HVAC systems. They are split systems, duct-free systems, hybrid systems, packaged heating, and air systems.
Installing an HVAC system is very important as it eliminates the pollutants and contaminants present in the air and purifies the indoor air either by heating or cooling it.
If the pollutants are not let out you are more likely to fall sick often. Now let us go through the guidelines while choosing an HVAC system:
#1 Inspect the Duct Installation
Checking the existing ducts installed in the house by a professional contractor is as important as buying the right HVAC system to ensure quality.
Experts from https://www.reznorhvac.com/ opine that any breakage or poor joint sealing can result in loss of efficiency in the whole system.
The contractor will clean the duct for any dust particles and other debris sticking on the duct and insulate them properly so that the system’s efficiency can be improved.
#2 Heat Pump- A Better Option
If you are looking for a multi-purpose heating and cooling system, then a heat pump would be the right choice. Heat pump act as an air conditioner in the cooling mode and the refrigerant present will be used to eliminate the hot air present inside the home.
Whereas using the reverse valve you can change the direction of the refrigerant flow and allow the heat pump to provide warmth by capturing heat from outside and flowing it inside the house.
These are considered the most efficient electrical heating system available today and you can easily reduce the energy consumption by 40% using this.
#3 Replacement of Old Furnace
To have an efficient heating system the first and foremost step is to replace the old furnace in the house. The Annual Fuel Utilization Efficiency of an old furnace will be as low as 56% when compared to the new one with 98.5%.
The higher efficiencies are achieved by the incorporation of new technology in the design of the air handler. There are 3 different types of air handlers available:
- Single-position air handler: The motor in this handler will run only at high speed irrespective of the requirement, thus causing energy wastage. It is used in old furnaces.
- Two-position air handler: In this, the motor can be operated at low and high speed based on the requirement thereby saving energy.
- Changeable speed air handler: These motors can operate at different speeds hence it is highly energy efficient.
To maintain a good quality of air and cooling inside the house, it is important to buy a high-performance air conditioner. Always choose an air conditioner with changeable-speed air compressors.
You also need a quality provider that will take the time to do a good job. So whether you’re looking for a provider of HVAC installation in the Coachella Valley to New York City then make sure you take the time to do the research to find a quality company.
Seasonal Energy Efficiency Ratio (SEER) is more than 16 thereby you can reduce the electricity bill by up to 40%. Regular maintenance and care can keep the HVAC system comfortable and long-lasting.
Consider the above guidelines while choosing an HVAC system for your house.
Are you considering getting a new HVAC system?